|Material:||PVDF/ PTFE||Diameter:||5mm, 6mm, 8mm, 10mm, 12.7mm|
|Layer:||One Layer, Two Layer Or Three Layer||Control:||PLC OMRON|
|Pneumatic Components:||SMC Cylinders||Detection Sensors:||Keynes, Japan Or Otis, Japan|
|Servo Motor:||Ankawa ,Japan||Line Track:||Shangyin, Taiwan|
|Besring:||NSK Nippon Ernsk||Speed:||0.8-1.6 / 2-4m/ Min|
Tubular Membrane Welding Machine,
PTFE Membrane Welding Machine
PVDF PTFE Ultra filtration Tubular Membrane Welding Machine are designed and improved based on imported equipment. Now Our machine can makes coiled pipe, welded pipe and inner scraping film completed at one time.
Equipment dimensions: Length 1450m x width 1100 x height 2200mm
Voltage: AC 220V single-phase three-wire system
Control voltage: 24V
Compressed air pressure:>0.6MPa Flow rate: 0.55m3/min
The machine can produce filter tube specifications: diameter 8mm and diameter 12.7mm
Non-woven fabric width: 17.5mm and 24.5mm
Welding layers: 1~3 layers Support overlap and staggered soldering
It can produce tubular membranes in diameter 5mm, 6mm, 8mm, 10mm, 12.7mm etc. And non-woven fabric layers in one layer, two layer or three layer based on customer requirements.
The machine can do two kind welding : multil-layer overlay welding or double-layer dislocation welding.
Tubular Membrane Welding Machine is also called ultrasonic welding machine, ultrasonic machine, welding machine. The machine adopts ultrasonic welding, tubular membrane substrate (non-woven) welding into infinite long tubular, cooperate with relevant coating process to produce tubular ultrafiltration membrane.
Function Configuration Information:
1. Pneumatic Components: SMC cylinders
2.Electronically Controlled PLC: OMRON Omron
3.Operation Interface: 7″ touch screen
4.Detection Sensors: Keynes, Japan or Otis, Japan
5.Servo Motor: Ankawa ,Japan
6.Line Track: Shangyin, Taiwan
7.Besring: NSK Nippon Ernsk